Install Compiere ERP & CRM in Redhat Enterprise Linux & Oracle 10g PartII

Install Redhat Enterprise Linux 5

To install RHEL5 is just as simple as install windows (event more simple), anyway just need a little bit hands on to make more familiar with linux installation. If you are new in Linux, you don't need to worry, Just follow this tutorial step by step.



Disclaimer:
This tutorial is for training purpose only, and I do not give any waranty it's work for you, it's mean you do with your own risk.

1. Please put our CD/DVD installer in to CD/DVD Rom and reboot your system, when you set your bios to boot from CD/Correctly, then your will see display as below.


2. Wait the proceess until the next screen appear is Language option. Choose your language and then press next. 3. Next display is Keyboard type selection, choose the keyboard type as you wish, or just choose US Keyboard as this is the most common keyboard type.

4. Next step you could enter the installation number, in this example we just skip it.
5. Next step is set up the partition, error message may be appear when redhat could not read the partition.

6. In this example we just remove all the partition, Please note that this will errase all data in hard disk, do not remove the partition if you have any data inside your harddisk.


7. Thick "Review and modify partitioning layout". so we can review and modify the partition layout in the next step.

8. Warning message appear, once again please make sure you don't have any data inside your hardisk drive. To continue press next.

9. Next window is the layot of partition in hard disk, in this example we only make one partition and Swap Partition. Swap partition is use for virtual memory in Linux. The size recomended for swap is double from physical memory, in this example we use 2GB swap because physical memory is 1GB.

10. Next step we have to choose for boot loader, simply select GRUB as a bootloader

11. Next step is network setting, you can use static IP addess or select dynamic IP Address, in this case we use Static IP address.



12. Tick IPv4 support and Active on boot, to make network active when system booting up.

13. Enter the IP address, and Subnet mask.

14. Please enter your host name and gateway address in your network

15. Next step, please select the time zone

16. Enter the password for root

17. To Customize the installation pakcage, Select "Customize now"

18. Next step is to choose your favorite GUI, you can choose GNOME or KDE

19. Select the Application Package

20. Select the additional language

21. System will check the dependency pakcage

22. Now, you are ready for the installation process

23. Redhat will prompt you CD that needed for installation process.


24. Press next, and wait the installation process


25. Redhat begin the installation process


26. Insert the CD #2, and continue


27. Insert CD #3 and continue




28. After installation process completed, system will required to reboot.


29. Congratulation, you finish the first stepp of installaion. Reboot the PC.....
30. System will display Kdump, just wait...

31. System will ask you to set the date and time

32. Next screen is software setup update,

33. If you wan to register your RHL5, you can do it now, otherwise just select : "No, I prefer register at a later time"

34. System will prompt you whether you do not want to connect to Redhat network for software update, at the moment just press "No thanks, I'll connect later" to continue.

35. Next display will appear, press next

35. Next, system will ask you to create user, you also able to create later.

36. At this moment, just skip this step.

37. System will detech sound card that you have, and play the sound that you should heared it, otherwise cek your speaker, and sound card compatibility.

38. In the next display you may add aditional software if you wish.

39. Then you have to reboot system again, after that system will be ready to use.

====
for ERP Training info please Contact: training@alphamedia.co.id